Category Archives: Digitizer

SIS8900 Single Ended Rear Transition Module (RTM) shipping

Posted on December 2, 2011 by mki

The first batch of SIS8900’s came out of stuffing earlier this week. Information on the card can be found under www.struck.de/sis8900.html

Posted in Digital I/O, Digitizer | Leave a comment

Developments in xTCA for the SLAC National Accelerator Laboratory

Posted on November 29, 2011 by mki

The 125 MSPS 16-bit MTCA.4 SIS8300 digitizer is used in combination with an in house RTM development at SLAC for FPGA based accelerator phase control to Femtosecond stability.   Download the November 2011 San Jose ATCA summit  poster as PDF here (courtesy Ray Larsen et al. … Continue reading →

Posted in Conference/Show, Digitizer | Leave a comment

Charnokite X-ray fluorescense example with SIS3820 scaler and SIS3302 digitizer

Posted on November 25, 2011 by mki

The SIS3820 multi purpose scaler in MCS (Multi Channel Scaler) and the SIS3302 digitizer in MCA (Multi Channel Analyzer) mode can be used for continous scans at Synchrotron Radiation beamlines. The image (courtesy Dr. Karen Appel, Dr. Manuela Borchert and … Continue reading →

Posted in Digital I/O, Digitizer | Tagged , | Leave a comment

SIS3316 16 channel 125/250 MSPS 16/14-bit VME digitizer family

Posted on November 4, 2011 by mki

We are about to double the channel density per single width VME card with the SIS3316 high speed high resolution digitizer design. The two members of the new family are: SIS3316-14-250 the 250 MSPS 14-bit card  SIS3316-16-125 the 125 MSPS  … Continue reading →

Posted in Digitizer | Tagged , , , , | Leave a comment

Paper on SIS3301 100 MS/s 14-bit digitizer in the LUX Dark Matter Experiment DAQ

Posted on August 23, 2011 by mki

A preprint with the description of the use of the SIS3301 VME digitizers in the data acquisition chain of the liquid Xenon LUX Dark Matter detector was released on August 11th. 2011. A total of 122 PMTs is read out … Continue reading →

Posted in Digitizer, Firmware | Tagged , | Leave a comment

New SIS8300 V2 digitizer firmware 0x1102 online

Posted on August 4, 2011 by mki

Please go to sis8300firm.html to access the current 0x1102 firmware for the V2 hardware design. The underlying FPGA VHDL project will be made available on request. A user DMA interface as well as the possiblity to generate interrupts from user firmware … Continue reading →

Posted in Digitizer, Firmware | Tagged , | Leave a comment

Announcing the SIS8900 RTM for the SIS8300 Digitizer

Posted on August 1, 2011 by mki

The SIS8900 will be a single ended 50 Ohm impedance analog input RTM for the SIS8300 digitizer. Have a look at www.struck.de/sis8900.html also.

Posted in Digital I/O, Digitizer | Tagged | Leave a comment

SIS1350 500 MS/s 12-bit PCI Express Digitizers Shipping

Posted on June 21, 2011 by mki

The SIS1350 is our first PCI Express enabled PC add on digitizer card. The card has a sampling speed of 500 MSPS at a resolution of 12-bit. More details can be found under www.struck.de/sis1350.html

Posted in Digitizer | Tagged , , , | Leave a comment

Struck to exhibit at the 2011 ICALEPCS in Grenoble October 10th-14th

Posted on June 16, 2011 by mki

We will present our SIS8300 µTCA for Physics Digitizer and modules from our VME board level product range at the ICALEPCS conference this fall.

Posted in Conference/Show, Digitizer | Tagged | Leave a comment

Updated firmware for SIS3305 and SIS3320-250 online

Posted on June 1, 2011 by mki

A modification for the SIS3305 relating to pileup behaviour in gate mode is available for the SIS3305 under www.struck.de/sis3305firm.html. A MBLT64 related bug fix for the SIS3320-250 is available under www.struck.de/sis3320firm.htm

Posted in Digitizer | Tagged , | Leave a comment